|本期目录/Table of Contents|

[1]杨媚,张亚红,张帅3,等.三轴离心机运动学模型及变加速度模拟算法[J].西安交通大学学报,2017,51(09):159-164.[doi:10.7652/xjtuxb201709023]
 YANG Mei,ZHANG Yahong,ZHANG Shuai,et al.Kinematics Model and Acceleration Simulation Algorithm for a ThreeAxis Centrifuge[J].Journal of Xi'an Jiaotong University,2017,51(09):159-164.[doi:10.7652/xjtuxb201709023]
点击复制

三轴离心机运动学模型及变加速度模拟算法(PDF)

《西安交通大学学报》[ISSN:0253-987X/CN:61-1069/T]

卷:
51
期数:
2017年第09期
页码:
159-164
栏目:
出版日期:
2017-09-10

文章信息/Info

Title:
Kinematics Model and Acceleration Simulation Algorithm for
a ThreeAxis Centrifuge
作者:
杨媚12张亚红12张帅3董光旭12张希农12
1.西安交通大学机械结构强度与振动国家重点实验室,710049,西安;2.西安交通大学陕西省航天结构
振动控制工程试验室,710049,西安;3.中国工程物理研究院总体工程研究所,621999,四川绵阳
Author(s):
YANG Mei12ZHANG Yahong12ZHANG Shuai3DONG Guangxu12ZHANG Xinong12
1. State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi’an Jiaotong University, Xi’an 710049, China;
2. Shaanxi Engineering Laboratory for Vibration Control of Aerospace Structures, Xi’an Jiaotong University, Xi’an 710049, China;
3. Institute of System Engineering, China Academy of Engineering Physics, Mianyang, Sichuan 621999, China
关键词:
三轴离心机运动学模型三维变加速模拟运动参数求逆
Keywords:
threeaxis centrifuge kinematics model 3D acceleration simulation inversion of
motion parameters
分类号:
V217.1
DOI:
10.7652/xjtuxb201709023
摘要:
针对开展加速度过载模拟试验中确定离心机运动参数存在困难的问题,通过构造对称过载,采用逆向求解运动参数的方法进行处理,然后确定系统输入。结合运动合成法和矩阵旋转法建立了离心机的运动学数学模型,该模型是求解运动参数的基础。基于运动学模型推导得到模拟预期加速度过载的相关运动参数计算公式,由递推法得到各级转子转角、角速度以及角加速度参数时间变化历程。以两种典型过载作为预期过载,采用运动学逆问题求解运动参数,并将求解结果作为系统输入,采用RecurDyn仿真离心机产生的加速度过载。与预期过载对比进行验证,结果表明,求逆算法能精确地模拟预期加速度过载,算例中最大绝对误差控制在0.1g以内。此项工作可为三轴离心试验中试验载荷的设计提供理论依据和设计方法。
Abstract:
Dynamic acceleration simulation on threeaxis centrifuge is important to test some precision instruments’ performance under high Gload conditions. In order to select proper kinematic parameters to carry out dynamic acceleration simulations, a desired Gload curve is symmetrically constructed so that the kinematic parameters could be calculated inversely. First, the centrifuge system’s kinematics model is established through the motion synthesis method and matrix rotation method. Then, kinematic parameters’ calculation formulas are derived based on the kinematics modeling. The rotation angle, angle velocity and angle acceleration of each revolute joint are obtained by recursive method. To verify the algorithm, the Gload generated by RecurDyn, which uses the algorithm’s results as input, is contrasted with the desired Gload. The result shows that the algorithm is viable and the maximum absolute error is less than 01g.

参考文献/References:

[1]柴世杰, 童中翔, 高彦玺. 未来空战与推力矢量技术 [J]. 航空计算技术, 2002, 32(3): 4548.
CHAI Shijie, TONG Zhongxiang, GAO Yanxi. Future air combat and thrust vectoring technology [J]. Aeronautical Computer Technique, 2002, 32(3): 4548.
[2]KVRGIC V M, VIDAKOVIC J Z, LUTOVAC M M, et al. A control algorithm for a centrifuge motion simulator [J]. Robotics and Computerintegrated Manufacturing, 2014, 30(4): 399412.
[3]常乐, 刘正华, 温暖, 等. 新型三轴离心机系统构型及数学建模 [J]. 北京航空航天大学学报, 2015, 41(2): 283288.
CHANG Le, LIU Zhenghua, WEN Nuan, et al. Configuration and mathematical modeling for advanced threeaxis centrifuge system [J]. Journal of Bejing University of Aeronautics and Astronautics, 2015, 41(2): 283288.
[4]宋琼, 胡荣华. 动态飞行模拟器及其发展概述 [J]. 装备环境工程, 2015, 12(5): 1118.
SONG Qiong, HU Ronghua. Summarization of dynamic flight simulator and its development [J]. Equipment Environmental Engineering, 2015, 12(5): 1118.
[5]马杰, 姚郁. 一种新型动态飞行过载模拟器及其运动学分析 [J]. 系统仿真学报, 2009, 21(s2): 112114.
MA Jie, YAO Yu. Kinematics analysis of new flight acceleration simulator [J]. Journal of System Simulation, 2009, 21(s2): 112114.
[6]杨业, 梁禄扬, 吴浩, 等. 基于带回转台离心机试验的惯性平台仿真建模研究 [J]. 航天控制, 2014, 32(2): 917.
YANG Ye, LIANG Luyang, WU Hao, et al. Inertial platform modeling and simulation based on centrifuge test with a rotating table [J]. Aerospace Control, 2014, 32(2): 917.
[7]贾普照. 稳态加速度模拟试验设备: 离心机设计 [J]. 航天器环境工程, 2010, 27(4): 534541.
JIA Puzhao. Steady state acceleration simulation test equipment: centrifuge design [J]. Spacecraft Environment Engineering, 2010, 27(4): 534541.
[8]廖建平, 龙祖洪, 徐永, 等. 基于双离心机的正弦加速度数学模型的建立 [J]. 中国惯性技术学报, 2007, 15(2): 252254.
LIAO Jianping, LONG Zuhong, XU Yong, et al. Sine acceleration model based on double centrifuge [J]. Journal of Chinese Inertial Technology, 2007, 15(2): 252254.
[9]由俊生, 由勇, 许叙遥, 等. 歼击机飞行员三轴加速度过载模拟建模与仿真研究 [J]. 系统仿真学报, 2006, 18(s2): 2830.
YOU Junsheng, YOU Yong, XU Xuyao, et al. Research for modeling and simulation of pilot threeshaft acceleration [J]. Journal of System Simulation, 2006, 18(s2): 2830.
[10]张东锋, 欧锋. 一类飞行器动态变化加速度模拟试验原理探索 [J]. 装备环境工程, 2015, 12(5): 5660.
ZHANG Dongfeng, OU Feng. Simulation test principle for a type of aircrafts with variable accelerations [J]. Equipment Environmental Engineering, 2015, 12(5): 5660.
[11]关立文, 刘慧, 付萌. 动态飞行模拟器实时运动规划算法 [J]. 清华大学学报(自然科学版), 2015, 55(7): 709715.
GUAN Liwen, LIU Hui, FU Meng. Realtime motion planning algorithm for dynamic flight simulators [J]. Journal of Tsinghua University(Science & Technology), 2015, 55(7): 709715.
[12]RICHARD C, DENNIS K. Controlling the human centrifuge as a force and motion platform for the dynamic flight simulation[EB/OL]. [20170116]. https:∥arcaiaaorg/doi/pdf/102514/619851742.
[13]VIDAKOVIC J, FERENC G, LUTOVAC M, et al. Development and implementation of an algorithm for calculating angular velocity of main arm of human centrifuge [C]∥15th International Power Electronics and Motion Control Conference. Piscataway, NJ, USA: IEEE, 2012: 13256171.
[14]韩清凯, 罗忠. 机械系统多体动力学分析、控制与仿真 [M]. 北京: 科学出版社, 2010: 812.

备注/Memo

备注/Memo:
国家自然科学基金委员会与中国工程物理研究院联合基金资助项目(U1630120)
更新日期/Last Update: