|本期目录/Table of Contents|

[1]徐亮,兰进,高建民,等.一种类螺纹孔结构的旋转射流换热特性数值模拟[J].西安交通大学学报,2017,51(09):11-18.[doi:10.7652/xjtuxb201709002]
 XU Liang,LAN Jin,GAO Jianmin,et al.Heat Transfer Characteristics Research of Screw Thread Swirling Impinging Jets Based on Numerical Simulation Method[J].Journal of Xi'an Jiaotong University,2017,51(09):11-18.[doi:10.7652/xjtuxb201709002]
点击复制

一种类螺纹孔结构的旋转射流换热特性数值模拟(PDF)

《西安交通大学学报》[ISSN:0253-987X/CN:61-1069/T]

卷:
51
期数:
2017年第09期
页码:
11-18
栏目:
出版日期:
2017-09-10

文章信息/Info

Title:
Heat Transfer Characteristics Research of Screw Thread Swirling
Impinging Jets Based on Numerical Simulation Method
作者:
徐亮兰进高建民李云龙
西安交通大学机械制造系统工程国家重点实验室,710049,西安
Author(s):
XU LiangLAN JinGAO JianminLI Yunlong
State Key Laboratory of Mechanical Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an 710049, China
关键词:
旋转冲击射流冲击冷却换热均匀性螺纹孔
Keywords:
swirling impinging jet impingement cooling heat transfer uniformity threaded nozzle
分类号:
TK124
DOI:
10.7652/xjtuxb201709002
摘要:
为了提高传统圆孔射流换热的均匀性,提出了一种新型的射流孔结构,即在普通圆孔周围设置螺旋槽,类似于内螺纹,并基于已有文献中的一种置入螺旋杆喷嘴的旋转射流实验数据,发展了一种采用RNG kε湍流模型的旋转射流传热数值计算方法。采用该方法,研究了雷诺数(4 000~12 000)、冲击距离(1~8倍当量直径)、螺旋角(0°~75°)等参数对所设计的螺纹孔旋转射流传热的影响。数值结果表明:提高雷诺数可以有效提高换热效率,并且能获得良好的换热均匀性;随着冲击距离的增大,旋转射流的局部努塞尔数先增大后减小,双峰值特性逐渐消失并转变为单峰值特性,在4倍当量直径的冲击距离时,换热系数达到最大值;随着螺旋角增大,中心点的局部努塞尔数也随之增大,同时换热均匀性会变差。研究还发现,不同冲击距离下换热性能最佳时对应的螺旋角也不同。
Abstract:
To improve the uniformity of traditional impinging jet heat transfer, a new type of jet structure with some circumferential spiral channels set inside the normal nozzle, like the internal thread, is proposed in this paper. First, several numerical methods are adopted to process the experimental data of the swirling impinging jet from a swirl generator, and the data are referenced from a published literature. Results show that the RNG kε turbulence model is more suitable for simulation of the swirling impingement jet. Then, the effects of such parameters as Reynolds number (4 00012 000), impact distance (18 times of equivalent diameter) and helix angle (0°75°) on the heat transfer performance of such threaded hole are studied. The research is focused on the flow field and heat transfer characteristics. The experimental results indicate that the heat transfer rate and the uniformity of impinging target will increase with the Reynolds number, and the local Nusselt number will increase first and then decrease with the increasing impact distance. Meanwhile, the doublepeak feature of the local Nusselt number will change to singlepeak shape, and the maximum local Nusselt number can be obtained at the 4fold equivalent diameter. The local Nusselt number at the center point will increase with the helix angle, but the heat transfer uniformity will be worse. In addition, it is found that the helix angle corresponding to the best heat transfer performance also changes with different impact distances.

参考文献/References:

[1]曹玉璋. 航空发动机传热学 [M]. 北京: 北京航空航天大学出版社, 2005: 125137.
[2]韩介勤, 桑地普·杜达, 斯瑞纳斯·艾卡德. 燃气轮机传热和冷却技术 [M]. 西安: 西安交通大学出版社, 2005: 1719.
[3]VISKANTA R. Heat transfer to impinging isothermal gas and flame jets [J]. Experimental Thermal and Fluid Science, 1993, 6: 111134.
[4]AHMED Z U, AlABDELI Y M, MATTHEWS M T. The effect of inflow conditions on the development of nonswirling versus swirling impinging turbulent jets [J]. Computers & Fluids, 2015, 118: 255273.
[5]SHARIF M A R. Numerical investigation of round turbulent swirling jet impingement heat transfer from a hot surface [J]. Computational Thermal Sciences, 2016, 8(6): 489507.
[6]KUMAR S S, HINDASAGERI V, PRABHU S V. Local heat transfer distribution on a flat plate impinged by a swirling jet generated by a twisted tape [J]. International Journal of Thermal Sciences, 2017, 111: 351368.
[7]HUANG L, ElGENK M S. Heat transfer and flow visualization experiments of swirling multichannel and conventional impinging jets [J]. International Journal of Heat Mass Transfer, 1998, 41(3): 583600.
[8]YANG H Q, KIM T, LU T J, et al. Flow structure, wall pressure and heat transfer characteristics of impinging annular jet with/without steady swirling [J]. International Journal of Heat and Mass Transfer, 2010, 53: 40924100.
[9]杨会群, 金东范, 卢天健. 环形旋转冲击射流热流特性的实验研究 [J]. 中国科学: 技术科学, 2011, 41(5): 648655.
YANG Huiqun, JIN Dongfan, LU Tianjian. Experimental investigation on heat flow characteristics of horizontal rotating impact jet [J]. Scientia Sinica: Technologica, 2011, 41(5): 648655.
[10]IANIRO A, CARDONE G. Heat transfer rate and uniformity in multichannel swirling impinging jets [J]. Applied Thermal Engineering, 2012, 49: 8998.
[11]NUNTADUSIT C, WAEHAYEE M, BUNYAJITRADULYA A, et al. Visualization of flow and heat transfer characteristics for swirling impinging jet [J]. International Communications in Heat and Mass Transfer, 2012, 39(5): 640648.
[12]NUNTADUSIT C, WAEHAYEE M, BUNYAJITRADULY A, et al. Heat transfer enhancement by multiple swirling impinging jets with twistedtape swirl generators [J]. International Communications in Heat and Mass Transfer, 2012, 39(1): 102107.
[13]陈玉阳, 苑中显, 马重芳, 等. 旋转射流冲击换热热液晶显示实验研究 [J]. 工程热物理学报, 2003, 24(4): 646648.
CHENG Yuyang, YUAN Zhongxian, MA Zhongfang, et al. Experimental study of heat transfer of swirling jet impingement with liquid crystal technique [J]. Journal of Engineering Thermophysics, 2003, 24(4): 646648.
[14]CASANOVA J O. CFD and correlations of the heat transfer from a wall at constant temperature to an impinging swirling jet [J]. International Journal of Heat and Mass Transfer, 2012, 55: 58365845.
[15]CASANOVA J O, ORTIZ F J. Numerical simulation of the heat transfer from a heated plate with surface variations to an impinging jet [J]. International Journal of Heat and Mass Transfer, 2014, 76: 128143.
[16]LLQVIST T H, FUCHS L. Numerical study of swirling impinging jets with heat transfer [C]∥ASME 2004 Heat Transfer/Fluids Engineering Summer Conference. New York, USA: ASME, 2004: 965975.
[17]AMINI Y, MOKHTARI M, HAGHSHENASFARD M, et al. Heat transfer of swirling impinging jets ejected from Nozzles with twisted tapes utilizing CFD technique [J]. Case Studies in Thermal Engineering, 2015, 6: 104115.
[18]SALMAN S D, KADHUM A A H, TAKRIFF M S, et al. Experimental and numerical investigations of heat transfer characteristics for impinging swirl flow [J]. Advances in Mechanical Engineering, 2015, 6(2): 631081.

备注/Memo

备注/Memo:
陕西省自然科学基础研究计划资助项目(2015JQ5126)
更新日期/Last Update: